As we all know, in the outdoor environment with strong light, the
brightness of LED display is very important, which directly affects whether the
audience can see the information on the screen clearly.
What factors determine the brightness of the lamp beads of LED display?
Let’s find out.
1. LED chip: The quality of LED chip directly affects the
brightness of LED lamp beads. High-quality LED chips can produce higher brightness.
2. Electric Current: The flow magnitude of electric current
will also affect the brightness of LED lamp beads. Generally speaking, the
larger the current, the higher the brightness of LED lamp beads. However,
excessive current may cause LED lamp beads to overheat, thereby shortening
their service life.
3. Packaging Material: The packaging material of LED lamp beads
will also affect their brightness. High-quality packaging materials can better
conduct light, thereby increasing the brightness of LED lamp beads.
4. Driving Circuit: The design of the driving circuit will
also affect the brightness of LED lamp beads. Excellent driving circuit design
can increase the brightness of LED lamp beads and also extend their service
life.
5. Usage Environment: The usage environment of LED lamp beads, such as temperature, humidity, etc., will also affect its brightness. For example, a high temperature environment may cause the LED lamp beads to overheat, thereby reducing their brightness.
6. Aging: As the use time increases, the brightness of the LED
lamp beads will usually gradually decrease. This is because the LED lamp beads
will undergo the so-called aging process.
Therefore, after excluding the force measure factors 5 and 6, in actual
use, in addition to using high-quality accessories, the most direct way to
increase the brightness of the LED display is to increase the power of the lamp
beads, that is, to make the current passing through the lamp beads larger and
achieve greater work power. But with this comes another problem. The higher the
power, the more electricity is consumed. The price of industrial electricity is
expensive, and the operation and maintenance costs over the past year cannot be
ignored.
What can we do to achieve higher brightness and lower power consumption?
1. Lens is attached to
the display screen.
Installing a lens
on the lamp beads of the LED screen is a good way to increase the brightness!
The lens can change the propagation path of light, making the light more
concentrated or dispersed. In LED lamp beads, the lens is mainly used for
focusing, concentrating the light in a specific area, and increasing the light
intensity per unit area.
The ICE lamp beads of the Chipshow high-brightness screen also use the
lens principle, but compared with ordinary lenses, there is a little
difference.
For the proposed ICE display, request the exact model datasheet and compare its pixel pitch, optical design and measured power consumption with the alternatives under the same operating conditions. Pixel pitch alone does not establish a brightness or energy-efficiency advantage.
2. Higher protection level.
This multi-encapsulation fully wrapped structural design effectively
protects the screen body and achieves strong all-weather resistance.
3. Heat dissipation
Heat dissipation system is also better than SMD module. In ICE LED
display heat dissipation is faster than other module of LED display.
4. Lower power consumption
The power of the ICE lamp screen is significantly reduced compared with
the common surface-mount lamp beads such as 2727 lamp beads at the same
spacing.
5. Let’s take a look at a comprehensive comparison
It can be seen that Chipshows’ ICE lamp screen has many characteristics
such as high reliability, high brightness, and low power consumption. In actual
use, it can greatly reduce various damages and lower electricity or maintenance
costs and many more.
Based on these characteristics, this display screen can perfectly adapt
to the following not only normal and but also harsh environments, such as.
5-1. Naked Eye 3D
View
5-2. Virtual XR
Studios
5-3. Storms and Rainy Weather
5-4. Desert areas
5-5. Ice and Snow
5-6. Coastal areas
Concept illustration of display component details. An LED package claim does not define the complete display: check the module, enclosure, connections and service access separately.
A high-brightness, high-stability, low-power outdoor screen is believed
to be an ideal choice for many users. As a C-Slim ICE screen with leading
designs in many aspects, it is a preferred option for users. Chipshow has been
specializing in LED display screens for more than 20 years, with a top R&D
team and rich project experience. Chipshow is ready to launch more advantageous
products and cooperate with more customers with professional and good services.
