P0.95,P1.26,P1.58,P1.9 C-Pad-U is quick & easy wall mounting solutions, designed in a perfect 16:9 ratio to get HD 2K 4K LED video wall and camera friendly display. Features: • Golden ratio 16:9, cabinet size 608*342mm, 4 cabinets form a 55 inch LED display. • Magnetically modules and fully front serviceable design, easy installation and maintenance. • Lightweight tiles design allows it to be easily packed and stacked. • Internal cabling is all quick release allowing for tool less service. • 3840Hz refresh rate which eliminates scan lines and flicker in your display on camera. • 160° horizontal and vertical viewing angle and increased grayscale capabilities. Application: Widely used in auditorium, conference room, banquet hall, secturity monitoring, command system, etc.

P2.5,P3,P3.3,P4 C-Max is indoor commercial preferred, simplicity and durable, the same proportion of video source as LCD, can direct replace LCD. Advantages: 1. 640mm*480mm cabinet size. can be assmbled with variety of 4:3 and 16:9 large screens. 2. Direct mounted on the wall, save space and labor. 3. The cabinet is made of die-cast aluminum, which is light in weight. 4. Wall mounting installation, full front serviceable for module, power supply and cards. 5. Flatness, easy to install and disassemble. 6. The cabinet adopts simplicity internal wiring, which perfectly realizes the splicing of the cabinet. 7. Perfect design of lamp board PCB, high-end IC, easy to achieve high gray, refresh, brightness. 8. Good heat dissipation, no noise, energy saving and environmental protection. Applications: Widely used in commercial display, indoor fixed advertising, auditorium, conference room, banquet, vestibule, exhibition demonstration, transportation, studio, command control.

This LED display excellent for outdoor installation of glass curtain wall. No need of steel structure while installation, educing steel structure weight 50kgs/m2, 60%-80% transparency, making glass curtain wall more vivid and without affecting the views. Advantages: 1. Light weight, thin and transparent 2. Transparency ratio up to 63% 3. Strong adaptablity 4. Low power consumption 5. Front and rear serviceable 6. High-cost effective witnout supporting structure 7. Fast plug in and out the power cable and signal cable Application: outdoor upper-air glass curtain wall, outdoor partition wall, exhibition hall, airport, park landscape etc.

C-Vent, ventilating leads to high heat radiating, no need fan or air-conditioner, reducing 50% energy consumption. Advantages: 1. Ventilating: Air can transmit the display body directly, ventilation rate 50%. 2. No light penetration: Penetrating design without light penetration, no harm to contrast ratio, full conservated the display effect. 3. Front access: Front-maintenance module is convenient for disassembly and assembly. 4. Low windage resistance: Lower requirement of steel structure, 35% structure cost saved. 5. Air-conditioner exonerated: Ventilating leads to high radiating, no need fan or air-conditioner. 6. Energy-saving & environmental protection: Low power consumption, 50% energy saving. 7. High applicability: IP65 fully sealing design, rain proof, dust proof, adapted to all weather surroundings.

C-Smart is an simple integrated front and rear serviceable LED screen. No cabinet design, only need a simple frame to hold the modules, which can reduce a big cost of installation. Advantages: 1. Fully modular design for easy assembly and repair. 2. Light weight: weight of modules is 3.55kg/pcs. 3. Don't need space on the back for maintenance, it can save space of 800~1000mm than normal back maintenance screen. 4. Bulit-in receiving card and power supply with data memory. 5. Fully sealed components, simplified waterproof connections. 6. Fan-less nature cooling. 7. Maximum brightness 8. Low power consumption. Application: Used for monument signs, led message center, pole signs and pylon signs etc, it can also be assembled into a big billboard.

C-Fit P4,P5,P6,P6.67,P8,P10 LED screen is multi-functional outdoor advertising solution, it's worth every penny of it. Advantages: 1. Thinner and lighter: 15kg/m2 lighter and 20% thinner than iron cabinet,saving transportation space, reducing delivery weight and bearing requirements of buildings and steel structures. 2. Multi-function: advertising fixed installation, adding flying bar, connectors and fast lock for rental, adding rubber cushion and bracket for perimeter display. 3. Cost-effective: magnesium alloy cabinet,corrosiveness resistance and rusty. 4. Standard modules: P4 to P16 outdoor modules available. 5. Fast delivery: automatic batch products, huge stocks, shorten the delivery time. 6. Higher precision: CNC process, contour tolerance± 0.1mm, planeness tolerance < 0.5mm. integral moulding, indeformable, fast assembly.

C-Easy P5,P6.67,P8,P10,P16 is a front and rear serviceable, energy-saving, outdoor waterproof replaceable LED modules. Advantages: 1. Energy-saving≥30%. 2. Brightness≤8500Nits 3. High accuracy and high flatness. 4. Replaceable modules, fast and easy replace. 5. Front and rear service. 6. IP65 protection grade 7. 320*320mm module size, you can assemble it into different size screens.

P8,P10 C-Fit-Sport LED display adopt virtual replacement technology. Virtual ads could be transmitted to different countries instead of the real ads in stadium. Advantages: 1. Intelligent perimeter LED display. 2. Virtual replacement technology, powered by IR LED. 3. Fast Installation and maintenance cabinet design. 4. Soft protection kit design to protect players from harm. 5. Negative pressure heat-dissipation system, further guarantees the reliability. 6. Available for remote monitoring by App.

Features 1. The shell is made of cast aluminum and transparent board, and it is installed in an inverted style, which has good rainproof effect; 2. The exterior of the screen adopts a bright surface spraying process, which can be well matched with the car paint; 3. There is a hole at the bottom of the screen for installation with the roof bracket for easy installation; 4. Using DC to DC wide voltage 9 to 36 volt power supply, which can be used by almost all cars; 5. The screen body comes with a delayed start-up function, which does not affect the start of the car; 6. Accurate and efficient with Global GPS fixed-point placement; 7. Wireless control with mobile phone and pad, and the operation interface is simple and practical; 8. Real-time monitoring of the screen; 9. Full color cloud sending Android system architecture, Full Netcom 4G communication; 10. Ali Cloud in-vehicle TAXI_HUB dedicated platform service escorts you in-vehicle interconnection; 11. Standard WiFi module, support platform hotspot Internet access, car hotspot Internet access； 12. Support third-party APP, platform, microservice docking, safe, efficient and reliable； 13. Traffic trajectory, mileage, advertising log statistics, graphical and intuitive.

Outdoor transparent LED advertising solutions Advantages: 1. Lightweight: the weight is only 7.5kg/pcs, easy to install and maintain, without supporting structure reinforcement, and high efficiency. 2. High transparency: 58% transparency, turning the glass screen into a lifelike video wall, without affecting the outdoor vision. 3. All-weather: resistant to various working conditions such as low temperature, high temperature, humidity, etc.. 4. Low power consumption: using positive-emitting high-brightness LED lights, high conversion efficiency PFC function power supply, large screen energy saving more than 50%. 5. Front and rear maintenance: greatly improving the adaptability of the product to on-site installation conditions. 6. No steel structure: directly use the original glass curtain wall steel structure, which can reduce the weight of the steel structure by about 50kg per square meter. Application: Mainly used in shopping malls, terminal, car building, exhibition hall, office building glass curtain wall and other occasions with high lighting requirements.

Indoor Flexible LED Display Solutions Features 1. Light and thin: the weight is 0.28kg and thiness is 9.5mm. 2. Soft: flexible soft PCB board, with a bottom shell made of silicone material. 3. Creative shape: It can be bent, folded, wound, suspended, etc., freely combined into various shapes, artistic and creative. 4. Seamless splicing: 360-degree viewing angle, fully showing the streamlined appearance, seamless splicing. 5. High performance: High grayscale, high refresh, more high-definition and energy-saving.

1. Modular design with integrated power supply and receiving card, directly replace the traditional cabinet, saving the cost of the cabinet, only with a simple bracket for the installation; 2. Ultra-thin design, can be installed on the wall and maintained from the front and rear, convenient maintenance; 3. Unique mask design, deep black color and high contrast; 4. The module size is 640mm*320mm, larger size, better flatness; 5. The module uses 346 LEDs, with the characteristics of good heat dissipation and good weather resistance; 6. Constant current drive, 1/4 scan; 7. High brightness, up to 8500cd/㎡, and has the advantages of good light distribution curve and good angle consistency; 8. The protection grade for the module is IP65.