C-Trans-Film LED film - Transparent display for glasses
Features:
1 Continuing transfer from breaking point: the C-Film
series has broken the conventional design pattern of transparent LED film -
even though a single point of failure is hit during signal transfer, it does
not affectthe display of other parts (the backup date automatically
starts, seamlessly switching without impacting the display effects of other
points); in other words, the C-Film series has the breakpoint continuation
function which provides a more stable performance;
2 High transparency: the transparency of the LED film is
more than 78%, it does not affect the daylighting of glasses;
3 High grayscale: the RGB channel adopts the linear regulation
(32-level current level) to display the 16-bit grayscale image under any
current; so you do not have to worry about the requirement of current input
whether in indoor circumstances or semi-outdoor circumstances;
4 Simple installation: no requirement for the support of
steel structure, you just need to stick the film onto glasses, and then it can
start to display after the power signal is connected;
5 Light-weight and thin: the film is as thin as 2.5mm, and
the cabinet is as light as 5KG;
6 Flame retardant and anti-ultraviolet: the film’s flame
retardant grade reaches V-1, and the film can resist ultraviolet for more than
8 years without yellowing;
7 Wide application: the LED film display is very common in
indoor commercial outlets, and is widely used for advertising on transparent
media, such as glass curtain walls, acrylic walls, glass guardrails…