C-Sport P8 stadium perimeter LED screen display

P8,P10 C-Fit-Sport LED display adopt virtual replacement technology. Virtual ads could be transmitted to different countries instead of the real ads in stadium. Advantages: 1. Intelligent perimeter LED display. 2. Virtual replacement technology, powered by IR LED. 3. Fast Installation and maintenance cabinet design. 4. Soft protection kit design to protect players from harm. 5. Negative pressure heat-dissipation system, further guarantees the reliability. 6. Available for remote monitoring by App.

◙ The cabinet comes with a 90° rotating bracket and left and right fast locks for efficient assembly of the stadium LED display. ◙ The screen comes with soft mask and pillow protection, so athletes and the LED display are perfectly protected. ◙ Aluminum power box, thin and light, good heat dissipation, slowing down the aging of the power and module. ◙ Front and rear maintenance of the module, easy operation. ◙ Waterproof and dustproof, protection grade ≥ IP65. ◙ Energy-saving, about 1/3 energy saving than traditional LED display, greatly reducing the operating cost. ◙ Professional software, and supports video source input such as DP, HDMD, VGA, SDL, DVD, etc.

1 It adopts the plug-pull installation method: every cabinet comes with guide rails, and can be quickly plugged in and pulled out; this makes the disassembly and maintenance process simple; 2 The cabinet is made from high-precision aluminum profiles; this ensures the good flatness of the screen; 3 It is advisable to adopt the wall-mounted installation method; every module can be maintained from both front and rear; when you align all the modules in a straight line, the screen looks tidy; 4 High reliability: the fully enclosed modules plus IP65 plug-in components ensure the normal running of the screen in outdoor places; 5 The ultra-thin, ultra-light alloy cabinet will greatly save the cost of transportation and installation; 6 The C-Special stadium series is particularly used as a display solution for stadium walls, and stands around stadiums;

Features 1. The shell is made of cast aluminum and transparent board, and it is installed in an inverted style, which has good rainproof effect; 2. The exterior of the screen adopts a bright surface spraying process, which can be well matched with the car paint; 3. There is a hole at the bottom of the screen for installation with the roof bracket for easy installation; 4. Using DC to DC wide voltage 9 to 36 volt power supply, which can be used by almost all cars; 5. The screen body comes with a delayed start-up function, which does not affect the start of the car; 6. Accurate and efficient with Global GPS fixed-point placement; 7. Wireless control with mobile phone and pad, and the operation interface is simple and practical; 8. Real-time monitoring of the screen; 9. Full color cloud sending Android system architecture, Full Netcom 4G communication; 10. Ali Cloud in-vehicle TAXI_HUB dedicated platform service escorts you in-vehicle interconnection; 11. Standard WiFi module, support platform hotspot Internet access, car hotspot Internet access； 12. Support third-party APP, platform, microservice docking, safe, efficient and reliable； 13. Traffic trajectory, mileage, advertising log statistics, graphical and intuitive.

1.The box body is made of aluminum alloy, which is light in weight, thin in thickness, and beautiful in appearance; 2.The module is completely front-maintained, has good flatness, and is easy to install and disassemble; 3.The box body adopts internal wiring, and the wiring is simple, which perfectly realizes the splicing of the box body; 4.The cabinet has good heat dissipation, no noise, energy saving and environmental protection; 5.The box body is installed on the wall, which is widely used in commercial display, indoor fixed advertising, auditorium, conference room, banquet, front hall, exhibition demonstration, transportation, studio, command and monitoring; 6.Suitable for P2.5, P2.6, P2.97, P3.91 equidistant 250*250mm modules; 7.The box is easy to cut and can be made into the size of 1000/750/500*250 mm;

Features: 1 Good flatness: the screen adopts die-casting aluminum cabinets with a tolerance within 0.1mm; 2 Ultra-thin: the die-casting aluminum cabinets are 20% thinner and 15kg/㎡ than iron cabinets, which helps reduce transportation and framework costs significantly; 3 Easy to upgrade and replace: the cabinets are adapted to our P2.5~P16 modules; so you do not have to change the cabinets for an upgrade, this will save a lot of manpower and cabinet costs; 4 Multiple purposes: As a large display solution, the C-Fit series is widely used as outdoor advertising screens, stage rental screens, and stadium perimeter LED display screens; the C-Fit series is not only used as permanently wall-mounted screens but also used as ground-stacked screens for small events or spaces with low ceilings; 5 High brightness: the brightness reaches 3700~4200CD/㎡, so the screen can still present clear pictures under strong light; 6 Slow temperature rise, efficient heat dissipation: the heat-dissipation device adopts aluminum magnesium alloy material with excellent heat conduction; 7 Highly cost-effective: an IP65-rated enclosure provides protection against all kinds of bad weather conditions, such as water jets, salt spray, salt corrosion, and wind erosion; 8 High reliability: all the modules adopt seal technique and high-quality copper wire;

Flatness: ADC12 high strength die-cast aluminum cabinet, which can be assembled and disassembled frequently without deformation, good flatness. Practical: Simple and practical design, firm handle, convenient fast lock, simple and practical. Can be quickly assembled, disassembled and maintained from front and rear Strong and firm：The handle is integrated with the horizontal and longitudinal stiffeners to ensure no deformation when fixed and rental installations. Magnetic design：The magnet between the cabinets are accurately positioned and installed, and very cost-effective for rental installation. Over 5000m² global sales volume. Ready stock and fast delivery. Applied to rental displays such as commercial squares, large-scale events, theater stages, exhibition displays, and new product launches.

1. Flatness: ADC12 high strength die-cast aluminum cabinet, which can be assembled and disassembled frequently without deformation, good flatness. 2. Practical: Simple and practical design, firm handle, convenient fast lock, simple and practical. 3. Magnetic design: The magnetic module can be maintained from front and rear; the magnet between the cabinets are accurately positioned and installed, and very cost-effective for rental installation. 4. High protection: Corner protection+ anti-collision boss; Fully automatic protection of the surrounding Leds to avoid damage during transportation and installation; 5. Dual backup: Dual electric and signal backup can be selected to effectively solve the following problems: black screen, display error and unstable picture. 6. Over 5000m² global sales volume. Ready stock and fast delivery. 7. Multi applications: Support multiple installation methods such as floor-based mounting and hanging installation, and focus on providing customers in the fields of energy, justice, military, transportation, public security, finance, IT, etc. with overall solutions for visualization, intelligence, informatization, and digital LED display systems.