C-Smart P4/5/6.67/10 Outdoor LED Signs, Easy To Install And Maintain

C-Easy P5,P6.67,P8,P10,P16 is a front and rear serviceable, energy-saving, outdoor waterproof replaceable LED modules. Advantages: 1. Energy-saving≥30%. 2. Brightness≤8500Nits 3. High accuracy and high flatness. 4. Replaceable modules, fast and easy replace. 5. Front and rear service. 6. IP65 protection grade 7. 320*320mm module size, you can assemble it into different size screens.

P0.95,P1.26,P1.58,P1.9 C-Pad-U is quick & easy wall mounting solutions, designed in a perfect 16:9 ratio to get HD 2K 4K LED video wall and camera friendly display. Features: • Golden ratio 16:9, cabinet size 608*342mm, 4 cabinets form a 55 inch LED display. • Magnetically modules and fully front serviceable design, easy installation and maintenance. • Lightweight tiles design allows it to be easily packed and stacked. • Internal cabling is all quick release allowing for tool less service. • 3840Hz refresh rate which eliminates scan lines and flicker in your display on camera. • 160° horizontal and vertical viewing angle and increased grayscale capabilities. Application: Widely used in auditorium, conference room, banquet hall, secturity monitoring, command system, etc.

Features: 1 Continuing transfer from breaking point: the C-Film series has broken the conventional design pattern of transparent LED film - even though a single point of failure is hit during signal transfer, it does not affectthe display of other parts (the backup date automatically starts, seamlessly switching without impacting the display effects of other points); in other words, the C-Film series has the breakpoint continuation function which provides a more stable performance; 2 High transparency: the transparency of the LED film is more than 78%, it does not affect the daylighting of glasses; 3 High grayscale: the RGB channel adopts the linear regulation (32-level current level) to display the 16-bit grayscale image under any current; so you do not have to worry about the requirement of current input whether in indoor circumstances or semi-outdoor circumstances; 4 Simple installation: no requirement for the support of steel structure, you just need to stick the film onto glasses, and then it can start to display after the power signal is connected; 5 Light-weight and thin: the film is as thin as 2.5mm, and the cabinet is as light as 5KG; 6 Flame retardant and anti-ultraviolet: the film’s flame retardant grade reaches V-1, and the film can resist ultraviolet for more than 8 years without yellowing; 7 Wide application: the LED film display is very common in indoor commercial outlets, and is widely used for advertising on transparent media, such as glass curtain walls, acrylic walls, glass guardrails…

Features: 1 Good flatness: the screen adopts die-casting aluminum cabinets with a tolerance within 0.1mm; 2 Ultra-thin: the die-casting aluminum cabinets are 20% thinner and 15kg/㎡ than iron cabinets, which helps reduce transportation and framework costs significantly; 3 Easy to upgrade and replace: the cabinets are adapted to our P2.5~P16 modules; so you do not have to change the cabinets for an upgrade, this will save a lot of manpower and cabinet costs; 4 Multiple purposes: As a large display solution, the C-Fit series is widely used as outdoor advertising screens, stage rental screens, and stadium perimeter LED display screens; the C-Fit series is not only used as permanently wall-mounted screens but also used as ground-stacked screens for small events or spaces with low ceilings; 5 High brightness: the brightness reaches 3700~4200CD/㎡, so the screen can still present clear pictures under strong light; 6 Slow temperature rise, efficient heat dissipation: the heat-dissipation device adopts aluminum magnesium alloy material with excellent heat conduction; 7 Highly cost-effective: an IP65-rated enclosure provides protection against all kinds of bad weather conditions, such as water jets, salt spray, salt corrosion, and wind erosion; 8 High reliability: all the modules adopt seal technique and high-quality copper wire;

This screen is ventilated, lightweight, thin and front maintenance available, which is suitable for outdoor wall advertising solutions, especially for outdoor unipole advertising solutions. Features 1 This series is specially designed for two typical usage scenarios (1: coastal areas that have strong winds, 2: old buildings whose walls have special load-bearing requirements) 2 There are uniform ventilation holes in every module, significantly reducing windage; 3 The display screens are characterized by “Hollow Out” design and light-weight (cabinet weight (size: 960*960mm): 33KG, cabinet thickness (including modules): 127mm); 4 Based on signal box design and integrated power supply units, the screens’ inner structures are relatively simple, and the C-Vent series display screens just resort to air convection inside the screens to dissipate heat without using air conditioners; hence, more energy can be saved; 5 All the LED modules can be maintained from the front and back; the simple installation and maintenance provide a good user experience; 6 Modules are mounted vertically and the wideness of every module is only 240mm;

Outdoor transparent LED display solution Features 1 Light-weight: the weight is only 14.2kg/㎡，the screen just weights 15.3kgs（cabinet thickness without power box: 47.5mm, cabinet thickness with power box: 97mm）, It is quite easy to install and maintain, and there is no requirement for structural strengthening; 2 High transparency: the transparency of the screen is more than 48%; when mounted on a glass wall, the screen turns into a lifelike video wall; and you can still get a clear outward view through the transparent LED screen; 3 Adaptable to all weather conditions: the screen has high resistance at low/high temperatures and high humidity; it can work normally under different outdoor environments; 4 High ventilation: the grid-shaped LED modules ensure that wind can directly pass through gaps between grids; this will save you a significant cost that should have been used in the enhancement of the steel structure; 5 Front-And-Rear maintenance: you can install and maintain the screen from its front and back, so it has a very loose requirement of on-site installation conditions; 6 Large cabinet size: the screen adopts large-sized cabinets (cabinet size: 1.2meter * 0.9meter) to reduce the workload of installation;

Module features： 1,Easy：Modular design, easy assembly and maintenance. 2，module size：250*250mm ,Smooth surface, module gap small ，High precision Cabinet features： ●  Light：Cabinet size:500*500*86mm, Weight: 8.5kg/pc. ● Thin：Die-cast aluminum design, high precision, thickness only 86mm. ● Fast：Fast locks, Easy to assemble and disassemble. ● Compatibility：Available pixel pitch for P2.6，P3, P3.91，P4, P5, P6. ● Low：Excellent cooling design, no fans or air-conditioners needed noiseless, low power consumption, cost-effective.

Simplicity and durable, indoor commercial preferred. • 640x480mm cabinet size, it can be assembled with a variety of 4:3 and 16:9 LED large screens, directly mounted on the wall, saving space and labor. • The same proportion of video source as LCD, directly replacing the original LCD. • Widely used in auditorium, conference room, banquet hall, security monitoring, command system. Module features: • Easy: Modular design, easy assembly and maintenance. • Module size: 320*160mm, Smooth surface, module gap small, high precision Cabinet features: • Light: Cabinet size: 640*480*72.5mm, Weight: 7.5kg/pc. • Thin: Die-cast aluminum design, high precision, thickness only 72.5mm. • Fast: Fast locks, Easy to assemble and disassemble. • Compatibility: Available pixel pitch for P2.5, P3, P3.3, P3.91, P4, P5, P6. • Low: Excellent cooling design, no fans or air-conditioners needed. noiseless, low power consumption, cost-effective.