Product
Cases

Oversea Cases Inland Cases Contact Us

skypeled_screen msnled_signs@hotmail.com yahoo messagerledmanufacturer ICQ:456723491 E-mailmanager@chipshow.comTEl:86-755-83419012 TEl:86-755-83893997 FAX:86-755-82975893Mobile:86-15914111145Mobile:86-13510192145Mobile:86-1379836552Certificate

led display certificate

 

 

 

LED display knowledge

Video can be described as display a moving image, which is made up of many individual frames played at a fast rate. Good video is played at 30 frames per second or higher. Slower rate can begin to look choppy and affect the presentation quality........
"Dimming" and "shading" refer to entirely different functions and the terms should not be interchanged. The word “dimming” refers to a uniform brightness adjustment across the entire display to correct the intensity for ease of reading different ambient light conditions.......
Along with proper brightness, a display must have high contrast for good readability. Contrast is the difference between the background’s “off state” (blank display area) versus the “on state” (illuminated display area)......
The color and brightness emitted by an :ED are determined by the chemical composition and construction. Single-color (monochrome) displays are made up of one color of LEDs, whereas full-color displays contain LEDs that emit red, green and blue light......
The operational lifetime od an LED Display is determined by the lifetime of the LEDs. LED Manufacturers estimate the LED lifetime to be 100,000 hours under certain operating conditions. LED display end of lifetimes is when the frontal brightness has decreated to 50% of original brightness......
“LED” is an abbreviation for “Light emitting diode”. An LED is a solid-state electronic device than emits light when energized by applying power. The LED die is mounted to a lead frame(see right) which is encapsulated in an epoxy lens......
When sufficient voltage is applied to the chip across the leads of the LED, electrons can move easily in only one direction across the junction between the p and n regions. In the p region there are many more positive than negative charges......

LED stands for Light Emitting Diode, a kind of semiconductor which is used to give and receive the electronic signal into infrared rays or light, using the characteristics of compound semiconductor. This is used for household.......

LED's are special diodes that emit light when connected in a circuit. They are frequently used as "pilot" lights in electronic appliances to indicate whether the circuit is closed or not.......

Why there are some wave scorss in led display when photo it.It''s because of a phenomena called pyramid illusion. You can see this phenomena in below flash.The pyramid illusion (also called the Vasarely illusion) is a striking......

It's may hard to explain why rgb this 3 colors can make millions colors by words. But just play this game you will get it by youself.......

Company Profile | Products | Contact Us Link to: led displays | led screens | led panels
©2008 Chip Optech LED Display-professional LED Manufacturer. Support Service |Site Map
chip led display